
Precision Ceramic Bed Knives, Carbide Bed Knives, Cutting Rotors and Underwater Pelletizing Blades
Maintaining consistent pellet quality requires more than simply replacing a worn cutting blade. The correct knife dimensions, cutting geometry, material selection and installation accuracy all play important roles in pelletizing performance.
For manufacturers operating MAAG, GALA or BKG pelletizing equipment, identifying suitable replacement knives can be challenging, especially when original part numbers are unavailable or equipment configurations have changed over time.
SZ SUNLIT supplies precision-manufactured replacement pelletizing knives, including ceramic bed knives, tungsten carbide bed knives and cutting rotors for MAAG pelletizers, as well as underwater pelletizing blades for MAAG/GALA and BKG applications.
This guide introduces our available reference dimensions, equipment-related blade specifications and the technical information needed to confirm compatibility.
1. Replacement Bed Knives for MAAG Pelletizers
In strand pelletizing systems, the stationary bed knife works together with the rotating cutting rotor to cut polymer strands into pellets.
Bed knife material, dimensional accuracy, edge geometry and alignment can affect cutting stability, pellet consistency and wear performance.
SZ SUNLIT manufactures ceramic and tungsten carbide replacement bed knives for MAAG pelletizing applications.
1.1 Ceramic Bed Knives for MAAG Pelletizers
Ceramic bed knives provide a wear-resistant cutting solution for selected polymer processing applications.
SZ SUNLIT offers zirconia-based ceramic knife solutions, including application-specific ceramic materials and configurations.

Our available reference dimensions include:
| Ceramic Bed Knife Dimensions (mm) | Configuration |
|---|---|
| 212 × 20 × 8 | Single knife |
| 240 × 20 × 8 | Single knife |
| 318 × 20 × 8 | Single knife or matched sets of 2 or 3 |
| 350 × 20 × 8 | Matched two-piece set |
| 350 × 20 × 8 + 305 × 20 × 8 + 305 × 20 × 8 | Matched three-piece set |
These specifications are based on SZ SUNLIT’s manufacturing reference list for MAAG pelletizing applications.
The correct knife configuration must be confirmed according to the existing machine arrangement, mounting structure and cutting requirements.
Application Experience
In PA6 semi-dull and full-dull pelletizing applications, our HIT ceramic bed knife solution has achieved approximately twice the service life of the previously used knives under the reported operating conditions.
Actual service life depends on polymer formulation, operating parameters and equipment condition.
Learn more: Ceramic Pelletizer Bed Knives
1.2 Tungsten Carbide Bed Knives for MAAG Pelletizers
Tungsten carbide bed knives are suitable for applications where abrasive polymer compounds create demanding wear conditions.
For example, glass-fiber-reinforced engineering plastics can accelerate cutting-edge wear and increase replacement frequency.

SZ SUNLIT offers tungsten carbide bed knives for MAAG pelletizing equipment, including individual knives and matched sets.
| Carbide Bed Knife Dimensions (mm) | Configuration |
|---|---|
| 130 × 20 × 8 | Single knife |
| 230 × 20 × 8 | Single knife |
| 340 × 20 × 8 | Single knife |
| 318 × 20 × 8 + 106 × 20 × 8 | Matched two-piece set |
For abrasive materials, knife performance depends not only on carbide hardness but also on toughness, cutting-edge geometry and the overall operating conditions.
SZ SUNLIT supports material selection according to the customer’s polymer formulation and cutting requirements.
Learn more: Carbide Pelletizer Bed Knives
2. Replacement Cutting Rotors for MAAG Pelletizers
The cutting rotor is a critical component in strand pelletizing systems.
Its cutting edges must work together with the stationary bed knife while maintaining the required cutting geometry and mechanical alignment.
SZ SUNLIT supplies replacement cutting rotors for MAAG pelletizing applications based on confirmed technical drawings and equipment requirements.

Cutting Rotor Reference Dimensions
One of our reference cutting rotor designs includes the following dimensions:
| Parameter | Reference Specification |
|---|---|
| Cutting rotor outside diameter | Ø162.5 mm |
| Cutting section length | 340 mm |
| Overall rotor length | 614.5 mm |
| Equipment application | MAAG pelletizing equipment |
| Manufacturing basis | Technical drawing / confirmed sample |
These dimensions describe a specific rotor reference design and should not be interpreted as a universal specification for all MAAG pelletizers.
Different equipment models and configurations may require different shaft dimensions, cutting geometries, mounting structures and matching bed knives.
Important Compatibility Checks
Before manufacturing a replacement cutting rotor, the following details should be confirmed:
- Rotor outside diameter and cutting section length
- Overall length and shaft geometry
- Mounting and bearing-related dimensions
- Cutting-edge arrangement and geometry
- Matching stationary bed knife specifications
- Required materials and wear-resistant construction
- Existing rotor drawing or sample
Learn more: Pelletizer Rotor Blades
3. Replacement Underwater Pelletizing Blades for MAAG/GALA Systems
Underwater pelletizing systems cut molten polymer directly at the die face.
The cutter blades operate under demanding conditions involving mechanical contact, polymer temperature, process water and continuous rotation.
For reliable replacement, the blade dimensions, mounting geometry, material and cutter hub configuration must be carefully matched.
SZ SUNLIT offers replacement underwater pelletizing blades for MAAG/GALA applications based on customer specifications and technical verification.
MAAG/GALA Blade Reference List
The following references are taken from our product specification records.
| Equipment / Blade Reference | Dimensions (mm) | Recorded Material | Identification Status |
|---|---|---|---|
| GALA Model 7 / 10900728 | 44 × 22 × 4 | HSS/Nikro128 | Equipment-related reference |
| GALA EAC7 / 2604170841 | 44 × 22 × 3.5 | HSS | Equipment-related reference |
| UWP2500-B | 24.5 × 20 × 4 | 440 + WC | Equipment association to be verified |
Important: The identifiers above are references recorded in our product list. They have not all been independently verified as original MAAG/GALA spare part numbers.
The exact replacement specification must be confirmed against the existing blade, mounting geometry and machine documentation.
4. Replacement Underwater Pelletizing Blades for BKG Systems
BKG underwater pelletizing equipment includes different pelletizer families and machine configurations.
SZ SUNLIT offers replacement blade solutions for BKG-related applications, with dimensions and material specifications confirmed before manufacturing.
BKG Blade Size and Equipment References
| Equipment / Blade Reference | Dimensions (mm) | Recorded Material | Verification Status |
|---|---|---|---|
| AH-D250 | 22 × 46 × 4 | SX-6 | Equipment-to-blade fit to be verified |
| AH-D300 | 25 × 46 × 4 | HSS/Nikro128 | Equipment-to-blade fit to be verified |
| UMG AH2000 / 2604170840 | To be confirmed | HSS | Equipment-related reference |
| BKG blade | 46 × 12 × 4 | HSS/Nikro128 | Dimensional reference |
| BKG blade | 46 × 22 × 4 | HSS/Nikro128 | Dimensional reference |
| BKG blade | 46 × 25 × 4 | HSS/Nikro128 | Dimensional reference |
| BKG / 2K181200031 | To be confirmed | HSS/Nikro128 | Reference number requires verification |
The table provides a starting point for identifying replacement blades. It is not a verified one-to-one BKG OEM part number cross-reference.
Even when two blades have similar overall dimensions, differences in hole geometry, mounting features, cutting angles or material specifications may affect interchangeability.
For this reason, we recommend confirming the original blade drawing or sample before placing an order.
Learn more: Water Ring & Underwater Pelletizing Blades
5. Ceramic, Carbide and Steel Pelletizing Knives: How to Select the Right Material
Selecting the correct knife material is essential for balancing wear resistance, toughness, cutting performance and operating cost.
| Knife Material | General Characteristics | Typical Selection Considerations |
|---|---|---|
| Zirconia-based ceramic | High wear resistance and corrosion resistance | Selected bed knife applications where wear resistance is important |
| Tungsten carbide | High hardness and abrasive wear resistance | Glass-fiber-filled and other abrasive polymer compounds |
| High-speed steel (HSS) | Good toughness and cutting capability | Selected replacement blade applications |
| Tool steel | Material properties vary by grade and heat treatment | Application-specific cutting and wear requirements |
| Composite or coated blade construction | Properties depend on substrate and surface material | Specialized applications requiring a balance of properties |
The final material selection should be based on the actual polymer, filler content, operating conditions and equipment requirements.
Application Experience with Abrasive Polymers
In a reported PA66 + 50% glass fiber application, an SZ SUNLIT cutting solution achieved approximately 20 times the service life of the previously used component.
This is an application-specific result rather than a guaranteed performance improvement for all PA66 or glass-fiber-filled materials.
For demanding applications, our technical team can review the existing blade material and operating conditions before recommending a replacement solution.
6. Precision Manufacturing and Quality Control
Replacement pelletizing knives must meet the required dimensions and geometric tolerances to support correct installation and cutting performance.
SZ SUNLIT focuses on precision manufacturing and inspection for industrial cutting components.
Precision Manufacturing
For selected ceramic and carbide bed knife features, specified flatness or dimensional requirements can reach 0.002 mm, depending on the product design and applicable inspection conditions.
The actual tolerances for each order are confirmed through technical drawings and manufacturing review.
100% Inspection of Bed Knives
Our ceramic and tungsten carbide bed knives undergo 100% inspection according to the applicable product quality requirements.
Inspection focuses on relevant dimensional and geometric features, including those critical to correct installation and cutting performance.

Matched Knife Set Manufacturing
For applications requiring multiple bed knives, SZ SUNLIT supports matched configurations according to the customer’s equipment arrangement.
This includes combinations of different knife lengths used within the same cutting assembly.
Custom Replacement Manufacturing
We support manufacturing based on:
- Customer technical drawings
- Existing knife samples
- Confirmed dimensional specifications
- Equipment identification and installation requirements
- Application-specific material requirements
Our goal is to help customers obtain suitable replacement cutting components without compromising dimensional accuracy or installation requirements.
7. How to Confirm MAAG or BKG Pelletizer Knife Compatibility
The machine manufacturer and equipment model are useful starting points, but they are not always sufficient to identify the correct replacement knife.
Before ordering, customers should confirm the following information.
| Required Information | Purpose |
|---|---|
| Equipment manufacturer | Identify the machine brand |
| Machine model and serial number | Identify the equipment configuration |
| Existing blade or rotor dimensions | Establish the required size |
| Mounting hole and slot details | Confirm installation compatibility |
| Cutting-edge geometry | Confirm cutting arrangement |
| Existing knife material | Support material selection |
| Polymer and filler content | Evaluate wear and operating conditions |
| Technical drawing or sample | Enable detailed manufacturing verification |
If the original spare part number is unavailable, customers can provide photographs of the existing component together with its dimensions.
Our technical team can review the information and determine whether a suitable replacement can be manufactured.
8. Frequently Asked Questions
Can SZ SUNLIT supply replacement bed knives for MAAG pelletizers?
Yes. SZ SUNLIT manufactures ceramic and tungsten carbide bed knives for MAAG pelletizing applications, including individual knives and matched multi-piece configurations.
Do you manufacture replacement cutting rotors for MAAG pelletizers?
Yes. We supply replacement cutting rotors based on confirmed drawings and technical specifications. Rotor dimensions and matching bed knife requirements must be verified before production.
Can I order BKG underwater pelletizing blades by machine model alone?
The machine model is a useful reference, but the existing blade dimensions and mounting arrangement should also be confirmed. Different machine configurations may require different blade designs.
Can you manufacture replacement knives without an original part number?
Yes. Manufacturing feasibility can be evaluated using a technical drawing, physical sample or sufficiently detailed dimensional information.
Which knife material is suitable for glass-fiber-reinforced polymers?
Tungsten carbide is often considered for abrasive, glass-fiber-filled polymer applications. However, the most suitable grade and cutting geometry depend on the actual process conditions.
Are SZ SUNLIT knives original MAAG or BKG spare parts?
No. SZ SUNLIT supplies independently manufactured replacement cutting components. Our products are not represented as original MAAG or BKG spare parts.
9. Request a Replacement Pelletizing Knife Offer
Are you looking for replacement ceramic bed knives, carbide bed knives, cutting rotors or underwater pelletizing blades for your MAAG, GALA or BKG pelletizing equipment?
SZ SUNLIT can help review your replacement requirements and provide a manufacturing offer based on confirmed technical specifications.
To help us identify the correct replacement component, please send:
- Equipment brand and model
- Existing knife dimensions
- Technical drawing or sample photographs
- Required quantity
- Polymer type and operating conditions, if available
Our team will review your requirements and advise on the available manufacturing options.
Contact SZ SUNLIT – Request an Offer
Trademark Notice: MAAG, GALA and BKG are trademarks of their respective owners. SZ SUNLIT is an independent manufacturer and supplier of replacement industrial cutting components and is not affiliated with or endorsed by these equipment manufacturers. Brand and equipment names are used solely for application identification. Final compatibility must be verified against the customer’s equipment and technical specifications.